Fabian Bennelong asked 3 hafta ago
how to open A saab 93 without a key to Replace the Replacement Key Battery For the saab key code 9-3
Saab owners have a distinct set of steps to take to add a second key. It requires dealer assistance using a handheld computer dubbed Tech-2. Then the transponder must be replaced and a key need to be purchased.
Rotate your keys to stop one from deteriorating faster than the other. This will help to keep your keys in perfect condition.
Replacement Case
In contrast to the traditional Saab keys of the past keys, the new key fobs have electronics inside which makes it more difficult to make a copy. This has made theft of cars considerably more difficult than it was twenty years ago. However, it has also made the replacement of lost keys an incredibly expensive endeavor.
Every owner of a 9-3 saab replacement key should have at minimum two working keys. It costs a fortune to replace a lost key, as it requires replacing the CIM module, and programming the locking cylinders. Dealers charge between $100-$200 to do this.
There are ways to reduce these costly. Some parts providers will find the code on an old key (usually the same one that opens the doors and switches the ignition) and cut a new key blade out of metal for less than the dealer’s cost. The key, however, must be identical to the original to work correctly in your car.
You can also change the case yourself by following these steps. You will need an flathead screwdriver and patience. With the screwdriver, pry away the plastic and take out the emergency key. Once the case is open, remove the electronics and put them back into your new case. Place the key with the correct badge inside the case.
Replacement Battery
The saab key 9-3 replacement battery is a low-cost component that can be quickly and easily replaced. Cyclone’s YouTube video Cyd demonstrates how to program saab 9-3 key fob to replace the remote fob battery in just four steps. This tutorial can be used for any modern saab replacement keys uk-type key fob, however the procedure might differ slightly.
The first step is to find the button that opens the backup key within the fob. This button is usually located near the Saab logo on the back of the fob. Use a flathead to insert the screwdriver in the small hole in this button. This should be enough to let the fob case open to allow you to change the battery.
After you have installed the new batteries CR1632, it is possible to reassemble your remote key fob. You can then program it into your car. The whole process should not exceed an hour. It’s a simple process that does not require any special tools.
The procedure is a little more complicated in the event that you lose the key, but it’s possible. The dealer will have to determine the VIN of the car and then order a new key blade and a TWICE module with the exact unique code. The dealer will then need to program the key using MDI, a new software tool.
Replacement Key Fob
The key fob is the device that locks and unlocks your car. It has a battery within. Batteries have a limited lifespan and eventually will die. This is a frequent issue in all vehicles. The good thing is that you can change the batteries in most key fobs, without having to replace the entire case. Amazon sells replacement fobs that have all the electronic components installed. It is easy to open the case and replace the batteries. It is important to remember that you’ll need remove the emergency key first. you can do this by putting a small flathead screwdriver into the slot found in the middle of the case. Use the screwdriver to move around the case, and it will split open, making it easy to take it out.
If you are about to replace the keys, ensure you have a spare as this will reduce your total cost by a significant amount. If you have an additional key, request the dealer to cut it in half and program it to your vehicle. This is less expensive than purchasing a brand new key fob.
It is possible to add another key to your car if you don’t already have one, however it requires an extensive amount of research and work. It costs a few hundred dollars to get an additional car key. The computer in the vehicle must also be programmed. This can be done by a professional, but it’s an expensive option for the majority of owners.
Replacement Ignition
The current SAAB 9-3 has a more sophisticated alarm system built around a key code. If you lose only one key, it may be costly to replace it with another one since the car must include a computer and also be programmed to accept a new key. Locksmiths typically aren’t able to program this and even dealers will charge hundred dollars to program the new key!
Dealers will charge you the highest price to replace your car computer (also known as the CIM or SAAB twice) in the event that you lose your only functioning key. We can reprogram the EEPROM on your car’s computer to make it ready for an extra key. This will save you more than 50% of the cost you pay an auto dealer.
If you’ve been a long-time owner of a 03-11 SAAB 9-3, then you probably have noticed that the ignition switch isn’t very durable. If your ignition key isn’t functioning properly, it is time to look into replacing it. They can become sticky and the buttons are known to fall off. It’s not as difficult as it appears to replace the ignition key. With the right tools, it can be accomplished quickly.