Daniella Gunter asked 4 hafta ago
Choosing Upvc Window Replacement Hinges
Choosing and fitting upvc window replacement hinges isn’t as difficult as you might imagine. It is crucial to ensure that the arrow on the hinges is facing the correct way and the thickness (13mm or 17mm) of the hinge arm on the opening frame.
There are a few different types of hinges to choose from, each with unique features. This article will discuss the most popular types of uPVC window hinges and their advantages.
Egress/Easy Clean Hinge
These are a great choice to replace or upgrade your fire escape safety window because they can open to a full 90-degree angle. They can be closed to a ‘easy-clean’ position, allowing you to access the windows’ exterior without having to climb ladders or lean at risky angles.
Yale is one of the most trusted and well-known brands in the field of home security. They are suitable for all types of uPVC side-hung windows. By pressing a tiny button, the window sash can be moved to the side and into the easy-cleaning position. When the sash is closed, it will be reset to its original position.
Both 13mm and 17mm are both available. Use our Egress Selection Guide to help you select the best product for your window.
These hinges are designed to work with a standard side-hung frame that is made of aluminium or uPVC. The friction screw is used to adjust the resistance. This allows for easier opening of the window and reduces the chance of an accidental closure in severe winds. They have been cycle tested to more than 30000 cycles and comply with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.
There are no buttons or catches The Nico Egress Easy Clean Friction Hinge is easy to use and offers a practical solution to emergency egress as well as safe cleaning. First, open the window to the egress (full opening) position, and then press the hinge retaining clip located on the inside of the bottom corner. This will open both the bottom and top catches and allow you to move the sash towards the clean position. Close the window once you have the sash in an easy-cleaning position. This will set the hinges back to their egress positions.
Fire-Escape Hinge
Fire Escape Hinges (also called “Easy Clean”) are used to replace windows with side openings to protect against fire. These kinds of hinges for windows are more spacious and more efficient than conventional hinges to provide an open space to escape in the event of a fire. This kind of hinge is a legal requirement in any room that has windows, according to building regulations.
The windows feature an elongated friction that permits the windows to open up to a 90-degree angle. They also let the opening sash to slide over the glass when opened and allows for easy cleaning without having to use ladders. The hinges are easy to operate and don’t have complicated buttons or catches. They can be operated from the inside of the home using a safe, simple lever.
The hinges are manufactured in the UK by Cotswold and come complete with a child safety restrictor for day to day use that can be reverted with a hidden button providing you with peace of mind that your children will not accidentally open the window too far. The stack heights are 13mm or 17mm.
Find the length of the current side-hung window hinge that is attached to the frame. (See the guide for measuring the size of Upvc window hinges). Select the proper size hinge from the choices below.
It is important to note that the measurement is taken from the component that attaches to the frame and not the sash, the actual hinge length may be longer or shorter depending on the manufacturer of your old windows. When deciding on the width of the hinge, the majority of frames made of upvc can accommodate the 13mm stack height however if your previous window frame measures 17mm, then select this option. Alternatively you can fit the 4mm packer to make up for the difference. All hinges are supplied handed (1 left and one right). Screws are not included in the hinges. These can be bought separately if you require. Our window repair screws made of upvc are recommended. These screws are designed to enhance the performance of your hinges and allow them to operate effortlessly for a longer. They come with a lower friction design and a more durable weather seal, which includes a nylon reducer cap.
Restricted Hinge
There are occasions when windows must open fully and this can be difficult using a standard hinge. These child safety friction hinges are an excellent way to solve this problem. They can be used when ventilation is needed but cleaning or escape from the flame is not possible. They work by restricting the amount of sash that can open and allowing the to override this restriction by pressing the push of a button. They are suitable for both top and side hung windows. They are available in 17mm and 13mm stack heights.
The Nico Restricted Egress Friction Hinge combines the characteristics of a standard restrictor as well as an escape hinge to provide an efficient and easy way to meet building regulations. It is available in 13mm or 17mm stack heights and can be used for the top and side openings of uPVC window. It is supplied in a pair, where one hinge is restricted egress and the other unrestricted, allowing one hinge to be fitted on the lower part of the sash, while the other is fitted to the top.
These uPVC hinges are specifically designed to be used on windows that cannot be fully opened, such as bedrooms for children. The mechanism limits how far the sash opens to an appropriate height of 100mm and then re-engages when the window is shut.
As with the other types of uPVC friction hinges that are available, these hinges can be used on all styles of windows and are ideal for those difficult to reach windows above the ground level three-storey flats and windows that normally require a ladder to access them. They can be combined with our selection of security enhancements such as double glazing hinge replacement guard protection plates or dog bolts for PAS 24 performance.
When replacing a window hinge, it is essential to measure the length of the current hinge to ensure that you order replacements that match in size. This can be accomplished by looking through the image gallery of the hinge before deciding where you would like it to be. The hinges that hang from the top can only be positioned on one side, while the side-hung hinges can only be positioned on one side.
Standard Hinge
A standard hinge uses metal-to-metal contacts and has no additional components to reduce friction. It is available in many finishes and has a fire rating. To quickly determine the radius of a hinge, lay it out flat and align a quarter and dime in two corners. If the quarter is more snug, then the corner should be turned to 5/8 inches.
The hinge you choose can enhance or break the appearance of your door. It’s important to match the style and finish of your patio door hinge replacement to its hinges for a cohesive look that’s both functional and visually attractive.